Overview
MAC's
Vertical Platform Lift
was designed and engineered for home use. It's easy to operate easy to
install and virtually maintenance free.
 Every
safety detail has been carefully designed into Mac's Vertical Lifts,
including a non-slip platform, constant pressure switches, a low platform
for easy roll-on/roll-off, safety barrier and railing, and rolled edges.
|
The
lifts are sturdy enough to lift and lower up to 600 pounds and will
accommodate electric wheelchairs and scooters. Running on a
gear box and chain, the lifts provide a smooth and quiet up and down
ride, requiring little maintenance. All mechanics are fully
enclosed, yet easy to access through the rear or front of the housing
unit. The lifts are completely weatherized and attractively
finished in off-white. |
 |
Why install a platform lift?
Why not a ramp?
For vertical home lifts to allow level changes (porch to
ground, garage entry to house level, etc.) for your wheelchair or scooter,
choose a Mac's Vertical Platform Lift. This is the perfect solution to
get you or your loved one or client in and out of your house (or a public
place)! A Vertical
Platform Lift is an economical and practical answer to stair barriers.
Don't forget to visit our
Mac's Lift Main Page for a more detailed discussion of platform lifts vs. ramps.
See More Pictures
We did not want
this page to take too long to load, because of the number of pictures, so we
have included a few pictures here and ask that you click on our
Mac's Lifts Pictures Page to see more
pictures when you are ready. This page will take
longer to load (up to 6 minutes on a 28.8 dial-up, over a minute on cable/DSL line)...
|
 |
Specifications
 |
Warranty: One year warranty on parts against defects
|
|
Power:
Plugs into Household Current
110 volt AC current, by a ½ HP motor |
|
Toggle
control switches with a tamperproof key lock switch are on a low voltage
system, for safe operation |
|
Outdoor or
Indoor Installation
Power drive
system is all weather
(Lift operates in temperatures from -30 degrees to 120 degrees)
|
|
Heavy duty worm
drive gear box with heavy duty #50 lifting chain |
|
36 inch high
side guard rail |
|
Manual Back Up - Hand crank for
manual operation |
|
Adjustable limit
switches |
|
Automatic access
ramp and roll stop |
|
Non slip
platform |
|
Space Efficient
and Virtually Maintenance Free |
|
Weight Capacity -
600
pounds |
|
Lifting height:
Up to 50 inches for the standard PL-50 model or up to 72 inches on the
PL-72. |
|
Vertical
platform lift must be anchored on a level, 4" thick, 3600 psi reinforced
concrete surface or pad. |
Options
| Call-send switches (can be field
added) |
| Remote control call/send (can be
field added) |
| 90 degree turning platform (see our
Mac's Lift Pictures page for
a sketch)
(must be chosen at time of order - factory added) |
| Battery power (can be field added) |
| Landing gate/platform gate
(must be chosen at time of order - factory added) |
| Additional height for lifts up to 72 inches
(must be chosen at time of order - factory added) |
| Solid sides (must be chosen at time of
order - factory added) |
| Safety pan (Similar to safety
features found on many garage door openers, the safety pan is a limiting
device to keep the lift from lowering onto any object under the lift)
(must be chosen at time of order - factory added) |
| Portable Version (see our Mac's
Portable Stage Lift page for
more information) |
| ANSI model available (see
our Mac's Lift Pictures page
for a sketch)
The lift when configured with appropriate
options can meet the ANSI Al 7.1 Part XX, Section 2100 codes, as it
relates to residential applications. |
| Special Requests Welcome |
Safety Devices
The lift has following safety features for
protection of users and the general public:
| Upper and lower limit switches |
| Instant Reverse Motor |
| Powered with 110 volt AC current, by 1/2
HP motor, 6.4 Amp |
| Grounded electrical system |
| Heavy duty worm drive gear box with
heavy duty #50 lifting chain |
| Automatic access ramp |
| 36" guard rails on non-enter and exit
sides of platform |
| Non-Skid platform and access ramp
surface |
| Key-lock control |
| Switching & Control system 24 VAC low
voltage current |
The manufacturer
has been running a Mac's Residential Lift with a 600lb. load,
continuously, for the equivalent of 10 years residential use
without a single lost day!
Back to Top of Page
Return to Mac's Lift Main Menu
If you have any questions or would like to make an appointment for an
evaluation, please
contact us.
Trademarks and Copyrights used on this page are the property
of Mac's Lift Gate, Inc.. |
